A-STAND Candy Lacquer Candy Bottle Green Wide Range Of Online

A-STAND Candy Lacquer Candy Bottle Green

A-STAND Candy Lacquer Colors
The Candy range are paints with exceedingly intense, vivid and bright tones, ideal for obtaining truly striking and original colours on your models, dioramas and figures of civilian, science fiction, and Gundam subjects and much more.

Why use A-Stand?

The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.

A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.

Remember that all lacquer paints contain toxic components and it is advisable to use a respirator for its application, and to spray these products in a well-ventilated area.

The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner A.MIG-2013.

To use A-STAND Candy Lacquer, first, make sure you’re in a well-ventilated area and wear a respirator as these paints are toxic. Use A-Stand Airbrush Thinner & Cleaner A.MIG-2013 for cleaning and diluting. Thanks to its excellent fluidity, it sprays smoothly without clogging the airbrush. Let it dry for about 30 minutes to the touch (time may vary based on paint amount, humidity, and temperature), then wait 1 hour before applying other products. It’ll fully cure in 24 hours. Once dry, its tough finish allows you to add other lacquers, enamel weathering products, or acrylic paint on top, and you can also apply modelling masking tape easily.